Date:         Tue, 8 Sep 2020 10:26:59 -0600
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: In search of Vanagon Poptop stainless hardware
Comments: To: "Jim. Felder" <jim.felder@GMAIL.COM>
In-Reply-To:  <c1969455-9fbc-4a93-bb65-06ff1adfbe7b@Jim-Felders-iPhone-2>
Content-Type: text/plain; charset=utf-8

        Wouldn't be surprised @All to find them @ Ace Hardware also ~

@Least here in ABQ, Ace has an amazing selection of Nuts, Bolts, & Screws ~


On 8 Sep , 2020, at 10:09 AM, Jim. Felder wrote:

> 
> 
> 
> Gowesty warns to trim the top screws 5 mm, which I will do and rethread. Guess I will find out for sure when I pull the top but do you know if that is four screws or two?
> 
> 
> 
> Jim
> 
> 
> 
> 
> 
> 
> 
>> 
>> On Sep 8, 2020 at 10:43 AM,  <Alistair Bell (mailto:albell@shaw.ca)>  wrote:
>> 
>> 
>> 
>> Jim,  
>> 
>> Double check the bolts when you get them. Make sure that they are not long enough to interfere with the hinge arms. One of the top to hinge bolts has potential to hit hinge arm if it’s just that wee bit too long .  
>> 
>> Alistair  
>> 
>>> On Sep 8, 2020, at 8:25 AM, Jim. Felder  <jim.felder@gmail.com>  wrote:  
>>> 
>>> Thanks for the info. GoWesty had just the screws I was looking for.  
>>> 
>>> Jim  
>>> 
>>>> On Tue, Sep 8, 2020 at 9:54 AM Eric Caron  <ericcaron96@comcast.net>  wrote:  
>>>> 
>>>> Hi Jim,  
>>>> 
>>>> Pretty sure I got mine from Frank Condelli, but that was when I was in  
>>>> Canada Bus Fusion.  
>>>> 
>>>> I purchased a set for the entire bus.  
>>>> 
>>>> Eric Caron  
>>>> 
>>>> 
>>>> 
>>>>>> On Sep 8, 2020, at 10:12 AM, Jim. Felder  <jim.felder@GMAIL.COM>  wrote:  
>>>>> 
>>>>> I'm looking for a replacement truss head screws used with the westy  
>>>>> fiberglass poptop hinges and struts in stainless steel. Anyone know?  
>>>>> 
>>>>> Thanks,  
>>>>> 
>>>>> Jim  
>>>> 
>>>> 
>> 
>>