Date:         Sun, 11 Oct 2020 10:13:55 -0400
Reply-To:     Eric Caron <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ericcaron96@COMCAST.NET>
Subject:      Re: insulation
Comments: To: David Boan <dboan@OUTLOOK.COM>
In-Reply-To:  <MWHPR22MB0128D20B7CDD78A510DA21C0BA090@MWHPR22MB0128.namprd22.prod.outlook.com>
Content-Type: text/plain; charset=utf-8

Hi David,

        Dennis,  just did this to my 85 with engine and transmission out.  I don’t know the exact product yet,  I’ll get all that info when the van returns.

But, perhaps he will let you know what he chose to use.

If not I’ll report back when I have my van back.

Eric Caron 



> On Oct 10, 2020, at 10:35 AM, David Boan <dboan@OUTLOOK.COM> wrote:
> 
> Hello Vanagon Types
> 
> I have decided that it is time to tackle the firewall insulation in my '85.  Some of it is falling off and it is covering areas where rust is developing.   Has anyone come up with an alternative insulation?  I saw some ideas on another site, ranging from having nothing to using closed cell spray foam (does not absorb water) to fatmat.  None of the posts mentioned long-term success.  I do not plan to pull the transaxle to do this, so using spray foam would be very difficult.
> 
> Thanks in advance for any suggestions.
> 
> Dave B
> Boise