Date: Fri, 6 Nov 2020 19:36:56 -0700
Reply-To: OlRivrRat <OlRivrRat@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Subject: Re: GoWesty Engine Management system
In-Reply-To: <CAB2Rwfizi1x6D0h_jFj__2sHdjFgAko_3OtTqo4h1OLiskRnCQ@mail.gmail.com>
Content-Type: text/plain; charset=iso-8859-1
Neil
1 would like to think that most all normal data made available via OBD2
would be available from this GoWesty EFI Management System,, But, the info
that is viewable via the ScanGauge that GW provides with the kit doesn't seam
to be all the same info that is available via an OTC ScanGauge like the 1 I have
on My VDubaru, which makes it appear as though GW has some how loaded the
provided SG with a Proprietary Program that may only be capable of providing a
limited amount of data &/Or the ECU that GW uses in this Kit may only provide
info that GW deems important ~
The GW EFI that I have installed belongs to a Friend Who lives 60Mi's away
so I don't have the sort of access to it that would allow Me to do a lot of on going
testing along those lines ~
ORR ~ DeanB
On 6 Nov , 2020, at 6:52 PM, Neil N wrote:
> Dennis and OlRivrRat
>
> Sorry. I misunderstood. Using a MAF type device and TPS etc makes far
> more sense.
>
> Having access to information like idle valve duty cycle can be quite
> handy. Especially if it can be logged, which I'd assume is possible
> with the right software and laptop.
>
> Neil.
>
>
> On 11/6/20, Dennis Haynes <d23haynes57@hotmail.com> wrote:
>
>> The GW EFI does not use the original airflow meter. That gets replaced with
>> a really cool adapter and hot wire inline sensor often called a whistle. The
>> throttle body also gets replaced and a throttle position sensor is used, not
>> just a switch.
>>
>> The scan gauge tool can display the throttle position and also the duty
>> cycle of the idle control valve.
>>
>> Dennis
>>
>>
>> -----Original Message-----
>> From: Neil N <musomuso@gmail.com>
>> Sent: Friday, November 6, 2020 12:44 PM
>> To: Dennis Haynes <d23haynes57@hotmail.com>
>> Cc: vanagon@gerry.vanagon.com
>> Subject: Re: GoWesty Engine Management system
>>
>
>> I find it interesting that GW was able to make an OBD2 system work with the
>> older style PWM idle control valve and AFM.
>>
>> re: performance off idle at ~ 2000 RPM (and maybe fuel efficiency?), I'd be
>> curious if using the OE WBX idle control valve and AFM on this GM type
>> engine management system, are significant factors. i.e. is the Delphi ECU
>> normally used in an application(s) where *all* idle air is controlled by the
>> idle control valve and throttle angle, engine load etc. is reported by a
>> typical TPS-MAF (or MAP) vs an AFM?
>
> --
> Neil n
>
> VE7TBN
>
> 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt
>
> 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8
>
> VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>