Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2020, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 6 Nov 2020 17:52:39 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: GoWesty Engine Management system
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <CY4PR0801MB37312EA7A35A3484AC0CBB61A0ED0@CY4PR0801MB3731.namprd08.prod.outlook.com>
Content-Type: text/plain; charset="UTF-8"

Dennis and OlRivrRat

Sorry. I misunderstood. Using a MAF type device and TPS etc makes far more sense.

Having access to information like idle valve duty cycle can be quite handy. Especially if it can be logged, which I'd assume is possible with the right software and laptop.

Neil.

On 11/6/20, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> The GW EFI does not use the original airflow meter. That gets replaced with > a really cool adapter and hot wire inline sensor often called a whistle. The > throttle body also gets replaced and a throttle position sensor is used, not > just a switch. > > The scan gauge tool can display the throttle position and also the duty > cycle of the idle control valve. > > Dennis > > > -----Original Message----- > From: Neil N <musomuso@gmail.com> > Sent: Friday, November 6, 2020 12:44 PM > To: Dennis Haynes <d23haynes57@hotmail.com> > Cc: vanagon@gerry.vanagon.com > Subject: Re: GoWesty Engine Management system >

> I find it interesting that GW was able to make an OBD2 system work with the > older style PWM idle control valve and AFM. > > re: performance off idle at ~ 2000 RPM (and maybe fuel efficiency?), I'd be > curious if using the OE WBX idle control valve and AFM on this GM type > engine management system, are significant factors. i.e. is the Delphi ECU > normally used in an application(s) where *all* idle air is controlled by the > idle control valve and throttle angle, engine load etc. is reported by a > typical TPS-MAF (or MAP) vs an AFM?

-- Neil n

VE7TBN

1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt

1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8

VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.