Hi all, could you please help me to find out why and how to fix this... Thank you the oil pressure light blinking at idle and at all RPM Van description: 1989 tintop syncro, rebuilt 2.1 WBX with about 5K miles, a lot of peripheral items were replaced at rebuild including the low and high pressure senders. Mann oil filter, 10W40 dino oil in winter, 20W50 in summer. 10cent (Chris Corkin) oil cooler with fan. The Problem: The oil pressure light always blinks continuously when I turn the ignition on and went away when I started the engine.... until about a month ago... it blinks once, (not blinking continuously as before). My mechanic said the blue oil pressure sender is bad... so I ordered a new one and put it on. And now it blinks continuously, engine running or not at all RPM, cold or warm engine... I check the sender wire, looking OK the white plastic connector is OK too. What else to check? Could the high oil pressure sender be bad too? Is it safe to drive about 20 miles to the mechanic or get towed to him? thanks in advance dan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.