Date:         Sat, 12 Feb 2022 21:17:14 +0000
Reply-To:     "ddbjorkman@verizon.net" <ddbjorkman@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "ddbjorkman@verizon.net" <ddbjorkman@VERIZON.NET>
Subject:      Re: Friday NVC: Long-neglected valve adjustment question?
Comments: To: "alex@MEVAY.ORG" <alex@MEVAY.ORG>
In-Reply-To:  <CACARJKqvOYgwOJP2TQ6usarO77Dd7zoVZJX77FSKOYg5xJzhLA@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

Check them first.  For clearance, damage, and anything obvious.  Wiggle it all and if nothing out of whack, go for it.  Don't forget new valve cover gaskets.  This is from general knowledge.  I haven't had my head under a Land Cruiser's hood in quite a while.  You can always check YouTube for a video of it being done.
Dave B.the Boston one


-----Original Message-----
From: Alex MeVay <alex@MEVAY.ORG>
To: vanagon@GERRY.VANAGON.COM
Sent: Fri, Feb 11, 2022 1:01 pm
Subject: Friday NVC: Long-neglected valve adjustment question?

Is there any risk of collateral damage when doing a valve clearance
adjustment on an engine that is decades overdue?


Long version:

GF's parents are the original owner of a 1985 Land Cruiser, which they
graciously let us use when we visit.  Car lacks power and they don't
really take it on the highway anymore.  A quick google showed that
this engine has adjustable valves.  They don't remember ever having
the valves adjusted.  I also noticed the brake boost is noticeably
lower at idle, which I guess is a sign of weak vacuum from the intake
valves not closing fully.  Their local mechanic recently $oaked them
for new brakes because ZOMG SAFETY, didn't bother addressing a
destroyed sway bar end link which is visible right from the street,
and claims a valve adjustment needs special tools.  From a little
internet reading the "special tools" are a 14mm wrench, $6 feeler
gauge, and a flathead screwdriver.

Anyway, I'm interested in doing this work next time I'm there, but
since no good deed goes unpunished, and there is an obvious social
component here, is there any risk that doing the valve clearance on an
engine that's been so sorely neglected would cause stresses resulting
in other damage (broken valves, etc.)?

Thanks as always,

Alex