Date: Sat, 3 Apr 2021 11:21:32 -0400
Reply-To: Stephen Grisanti <bike2vcu@YAHOO.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Stephen Grisanti <bike2vcu@YAHOO.COM>
Subject: Re: Spare tire location
In-Reply-To: <CAK9Aa+mTLSFM1ot3QtB+M2PN+4wCTsJHoeh_YT6fJzJtz-qQFQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8
There’s a Samba thread about this with a similar solution.
Stephen
Mobile
> On Apr 3, 2021, at 10:57 AM, Bruce Todd <beeceetee@gmail.com> wrote:
>
> I think I am going to modify a plastic barrel and make a storage container
> - I found they are for sale for $20. A 23" diameter of so - should make
> for a fun project when I'm finished with all the sanding and painting
> around the house.
>
> Bruce
>
>> On Sat, Apr 3, 2021 at 6:42 AM Peter Cobb <careyid1@gmail.com> wrote:
>>
>> I have converted to 16 s . whats wrong with removing the spare and loose
>> some weight. If need to replace tire , have vehicle towed to nearest shop,
>> all of my driving is on paved roads
>>
>> On Fri, Apr 2, 2021 at 9:57 AM Dennis Haynes <d23haynes57@hotmail.com>
>> wrote:
>>
>>> The GoWesty steel wheels use the common 60 degree cone nut as used on
>> many
>>> aftermarket wheels. You may still need to check for length if using bolts
>>> or closed end lug nuts. For the screw in stud conversion kits be
>> extremely
>>> careful especially anytime the tires are re0installed. I have seen them
>>> fail at the threads where screwed into the rotor.
>>>
>>> Dennis
>>>
>>>
>>> -----Original Message-----
>>> From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of
>>> Richard Smith (Smirby)
>>> Sent: Friday, April 2, 2021 12:40 PM
>>> To: vanagon@GERRY.VANAGON.COM
>>> Subject: Re: Spare tire location
>>>
>>> For those who will be running alloy wheels but keep a steel wheel as a
>>> spare, consider also carrying a set of appropriate / previous lug
>>> nuts/bolts. The shoulders (and sometimes the diameter) of the lug
>>> nuts/bolts vary from the alloy to the steel.
>>>
>>> My new alloy wheels came with new nuts and I converted the fronts from
>>> bolts to studs that take the nuts (came in the kit). These have a
>> slightly
>>> different size, too, so I have a different wrench for them.
>>>
>>> In my jack bag - still have the original plastic bag that came with the
>>> van, which seems incredible to me that a plastic bag would last 34 years
>> -
>>> I keep a set of the old nuts (from the rear, which was always studs) so
>>> that I can use my old steel spare.
>>>
>>> …r
>>>
>>>> On Apr 2, 2021, at 9:29 AM, Jack R <jack007@COMCAST.NET> wrote:
>>>>
>>>> I keep a tire puncture repair kit handy, as well as a compressor, and
>>> have never had to put my spare on since I bought my van in 1987! I've
>> put
>>> over 120k miles on it.
>>>>
>>>> The only tire issue I had was in 1992, when I hit ice on the highway,
>>> was blown off the road, and my tire was knocked off the rim and deflated.
>>> Needless to say, a tow truck was needed, and the tire was remounted and
>> was
>>> driving again using the same tire. The HD multi-ply tires tend to hold
>> up
>>> very well. Frankly, I'd rather keep a 185/R14 in the clam shell, for
>>> safety and short drives.
>>>>
>>>> I've upgraded to 16" rims, and as Dennis said, the diameter is close
>> and
>>> I have 2WD, so I'm glad to have it set up this way.
>>>>
>>>> Jack R.
>>>> 84 Westy
>>>>
>>>> -----Original Message-----
>>>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
>>>> Behalf Of Chris S
>>>> Sent: Thursday, April 1, 2021 8:33 PM
>>>> To: vanagon@GERRY.VANAGON.COM
>>>> Subject: Re: Spare tire location
>>>>
>>>> I recently engaged in same conversation on FB Vanagon group because I
>>> thought so too. I’m not so sure now because there does not seem to be a
>> lot
>>> of structure behind the spare. After 21 years of Vanagon ownership put
>> me
>>> in the “plausible” club.
>>>>
>>>> Chris.
>>>> Wysłane z iPhone'a
>>>>
>>>>> Wiadomość napisana przez Rob <vwrobb@gmail.com> w dniu 4/1/21, o
>> godz.
>>> 18:05:
>>>>>
>>>>> The vanagon spare tire laying flat right up front like that is there
>>>>> to absorb energy when you run into something.
>>>>>
>>>>> Rob
>>>>> Vwrobb@gmail.com
>>>
>>
|