Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2021, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 19 Apr 2021 10:48:58 -0700
Reply-To:     Bruce Todd <beeceetee@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bruce Todd <beeceetee@GMAIL.COM>
Subject:      Re: Need help ... on lazy van
Comments: To: Dan N <dn92610@gmail.com>
In-Reply-To:  <CAFdLW6mnJ=a4Pn=KeG9TZfra5eo9BXovy6Dg_G1+0NkW+HcLeg@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Hi Dan,

Does it consistently perform this way - or from time to time? Based on what you are describing I have a similar issue but performance - or lack thereof tends to occur at a certain point during warm up - not when the van is cold as that is where it seems to run the best - but as it warms up. It then begins to get better when it reaches reg operating temp - where it usually behaves well.

86 Westy Syncro -

Bruce

On Mon, Apr 19, 2021 at 10:13 AM Dan N <dn92610@gmail.com> wrote:

> hi all, > > my 89 tintop Syncro has this weird issue that I try to find how to fix... > > From standing still in 1st gear the van (empty van) is very unresponsive, > something like it has no power at all, slow moving. If I rev it up to > between 2K rpm to 3K rpm, the power comes up and it moves, like normal as > it should - otherwise once it's running it works fine all gears, no lack of > power. > If I stop, put it in 1st gear then it did the same again, engine cold or > warm it doesn't matter. > > I did the followings: > - check vacuum - no leak > - check TPS - it clicks well as it should > - new spark plugs NGK BP6ET > - new dist. cap and rotor > - new fuel pressure regulator > - new fuel filter > - new Temp2 sensor at the thermostat housing. > - new Oxygen sensor at the cat > - air filter is very clean > - put in a spare AFM - and another one - no change > - spark plugs color is grayish, not white and not brown. > > The one thing I guess is the valves are not opening/closing correctly (on > one o2 2 cylinders), not checking this yet. > > I am lost... Please help if you have any idea. > > thanks in advance > > > thanks in advance >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.