Date:         Thu, 29 Apr 2021 13:16:01 -0400
Reply-To:     Eric Caron <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ericcaron96@COMCAST.NET>
Subject:      Re: Table leg hole?
Comments: To: Alistair Bell <albell@shaw.ca>
In-Reply-To:  <E30558FD-4B33-4053-9F39-30FA549D13BE@shaw.ca>
Content-Type: text/plain; charset=utf-8

I’m thinking about putting that on my winter update list.  One hole at bottom to lock.  One at the hight I prefer that clears the flip lids below.  To lock it higher and not moving. 

Anyone want to describe the Van Cafe leg to me and the list?  Anyone using that one?

Eric Caron 


> On Apr 29, 2021, at 11:53 AM, Alistair Bell <albell@shaw.ca> wrote:
> 
> Eric,
> 
> I bet a previous owner drilled that hole. For the purpose you guess.
> 
> I’ve thought about that way too. I was thinking spring loaded tapered pin. Yeah, I complicate things .
> 
> Alistair 
> 
>> On Apr 29, 2021, at 8:14 AM, Eric Caron <ericcaron96@comcast.net> wrote:
>> 
>> Hi folks,
>> 
>> On my table metal leg there is a hole that looks like it might line up with the end of the bolt when the table tightened.  Mine won’t line up as the leg is a bit high as I have a adaptor at the foot with a metal pipe that allows me to raise the table high. 
>> 
>> But, is that hole for locking the table in place so it doesn’t swing out? 
>> 
>> If so Would a few holes drilled in a line down the leg give you options for table hight and lock in position?
>> 
>> Anyone else have that hole in the table leg?
>> 
>> Eric Caron 
>> 85 GL Auto 
>