Date:         Tue, 4 May 2021 19:55:59 -0700
Reply-To:     David McNeely <davmcneely40@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David McNeely <davmcneely40@GMAIL.COM>
Subject:      Re: Table leg hole?
Comments: To: Eric Caron <ericcaron96@comcast.net>
In-Reply-To:  <4606C3F2-B92C-44A5-A5BA-1F9C2CBF6422@comcast.net>
Content-Type: text/plain; charset="UTF-8"

So,are you saying that the pin obviates the under table screw for fastening
the table in place?  With the pin, does the table fit tightly in place with
no rattles?

On Tue, May 4, 2021 at 10:45 AM Eric Caron <ericcaron96@comcast.net> wrote:

> Not sure why you are not getting the entire threads.
>
> This is a way of using a drilled hole in the table and collar with a pin.
> The several holes lock the table from swinging out in travel or lock up in
> useful positions when camped.  Pin out and all works normally.
>
>         A elligent solution.
>
> Eric
>
>
> > On May 4, 2021, at 10:42 AM, OlRivrRat <OlRivrRat@COMCAST.NET> wrote:
> >
> >        Would You Describe the Problem that This Mod Solves ~ Please ~
> >
> >> On 4 May , 2021, at 5:27 AM, Ryan Perry <rjdperry@GMAIL.COM> wrote:
> >>
> >> Yeah, it is rock solid for sure. You can tug on it all day long it is
> not
> >> moving.
> >>
> >> This in my estimation solves a problem of table swing while looking
> fairly
> >> stock.
> >>
> >> The goal in my van has always been to make needed upgrades that don't
> >> disrupt the factory look...as much as possible it is certainly a
> balancing
> >> game. (I have done the rear closet sliders so could be an argument to be
> >> made there.) But first glance across my van, you would see pretty much a
> >> factory look.
> >>
> >> The table leg was a good mod in my opinion. Fixes a problem with minimal
> >> disruption.
> >>
> >> Ryan (that's me)
> >> Asheville
>