Date:         Tue, 4 May 2021 23:03:22 -0400
Reply-To:     Eric Caron <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ericcaron96@COMCAST.NET>
Subject:      Re: Table leg hole?
Comments: To: David McNeely <davmcneely40@gmail.com>
In-Reply-To:  <CACvdLxPRBz+iauuXx2+UA9Jx-Yt1=iaUA5dqOo0X6wPNh7UM8g@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

Hi David,

        Earlier in the thread Ryan described that the function is the same as without the pin.  The added pin locks the table in certain set positions with the pin.  He didn’t discuss rattle or other things. ]
He gave some pictures I’m looking forward to going over. The earlier posts had the picture links. 

I’m not completely understanding the placement of the pin or what the pin looks like but I can visualize it.  

For me I would put the pin in the cabinet so it doesn’t show and change the original look.  I’m not sure where his pictures show it is.

Eric Caron 
85 GL Auto 



> On May 4, 2021, at 10:55 PM, David McNeely <davmcneely40@gmail.com> wrote:
> 
> So,are you saying that the pin obviates the under table screw for fastening the table in place?  With the pin, does the table fit tightly in place with no rattles?
> 
> On Tue, May 4, 2021 at 10:45 AM Eric Caron <ericcaron96@comcast.net <mailto:ericcaron96@comcast.net>> wrote:
> Not sure why you are not getting the entire threads.  
> 
> This is a way of using a drilled hole in the table and collar with a pin.  The several holes lock the table from swinging out in travel or lock up in useful positions when camped.  Pin out and all works normally. 
> 
>         A elligent solution.
> 
> Eric 
> 
> 
> > On May 4, 2021, at 10:42 AM, OlRivrRat <OlRivrRat@COMCAST.NET <mailto:OlRivrRat@COMCAST.NET>> wrote:
> > 
> >        Would You Describe the Problem that This Mod Solves ~ Please ~
> > 
> >> On 4 May , 2021, at 5:27 AM, Ryan Perry <rjdperry@GMAIL.COM <mailto:rjdperry@GMAIL.COM>> wrote:
> >> 
> >> Yeah, it is rock solid for sure. You can tug on it all day long it is not
> >> moving.
> >> 
> >> This in my estimation solves a problem of table swing while looking fairly
> >> stock.
> >> 
> >> The goal in my van has always been to make needed upgrades that don't
> >> disrupt the factory look...as much as possible it is certainly a balancing
> >> game. (I have done the rear closet sliders so could be an argument to be
> >> made there.) But first glance across my van, you would see pretty much a
> >> factory look.
> >> 
> >> The table leg was a good mod in my opinion. Fixes a problem with minimal
> >> disruption.
> >> 
> >> Ryan (that's me)
> >> Asheville