Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2021, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 26 May 2021 14:47:26 -0700
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: Discovered my clutch failure reason.
Comments: To: Bruce Todd <beeceetee@gmail.com>
In-Reply-To:  <CAK9Aa+m-cbFSQVEMPibXP2UjbD=OBtiOpRQuoqidKWq8WgK6KQ@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

I have Marco Mansi injectors and 1.25 rocker arm (previous version of 1.35) on 3 vans. I can confirm the engines have smoother idle, better take off from stop-and-go and also a bit of extra power going from 50/55mph to 60/65mph meaning extra power to pass slomo vehicles.

On Wed, May 26, 2021 at 2:05 PM Bruce Todd <beeceetee@gmail.com> wrote:

> Correct - there is a bit of a demo on Marco's site. I had it done at a > shop as I had a laundry list of items to take care of as well - and I > wanted it to be done correctly. :) > > On Wed, May 26, 2021 at 12:27 PM Andrew Berg <andrew@bergweb.ca> wrote: > > > I'm assuming the 1.35 ratio rockers can be installed without pulling the > > engine. Would these be worth considering for a 1.9? > > > > Andrew > > > > On Wed, May 26, 2021, at 3:06 PM, Bruce Todd wrote: > > > I just had the rockers and injectors installed - Definitely notice a > > little > > > boost and smoother idle but have only put a few miles on the van as I > am > > > working through a coolant issue and so I can't provide a full report as > > of > > > yet. He ships to Canada Alistair! > > > > > > Bruce > > > > > > > > > > > > On Wed, May 26, 2021 at 10:53 AM OlRivrRat <OlRivrRat@comcast.net> > > wrote: > > > > > > > On 24 May , 2021, at 1:28 PM, Alistair Bell <albell@SHAW.CA> wrote: > > > > > > > > > > I’ve stripped the motor as much as I can in van, got things prepped > > to > > > > remove. Rebuilt a spare throttle body, and plenum, injectors, > runners, > > hose > > > > assembly. > > > > > > > > > > Waiting for rain to stop before I drop motor. > > > > > > > > Hey Alistair > > > > > > > > While You have Eng Out,, You should give a look to this Guys > > Stuff > > > > > > > > > > > > > https://mansispeed.com/ <https://mansispeed.com/> > > > > > > > > I have installed 6 sets of His Injectors for Friends & so far > > All > > > > love the Performance Improvement ~ > > > > > > > > Have Installed 2 Sets of His previous 1.25 Rockers & again both folks > > very > > > > happy with Performance Improvement ~ > > > > > > > > The Efficiency Improve's from Either Or Both of these Upgrades might > > just > > > > also Add some Life Expectancy to Old H2OBoxrz ~ > > > > > > > > Will be doing 1 of his Oil Pumps soon ~ > > > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.