Date:         Thu, 27 May 2021 00:53:09 -0700
Reply-To:     starwagen@GMAIL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Loren Busch <starwagen@GMAIL.COM>
Subject:      Re: DRIVER SIDE GRAB HANDLE
Comments: To: John Rodgers <jrodgers113@gmail.com>
In-Reply-To:  <CA+az7_4N6G1ziiN6w5Xwat0z7QCwmUK1+00B80o0FA90BT5B5g@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

RE: Drivers Side Grab Handle
I just did exactly that!!  Rather I had it done.
First thing is getting one.  Be very sure you get ALL the parts!!  The base
that goes under the handle, two of them, can be hard to find.
Second, and this is VERY important, you have to be very careful when
drilling the holes to mount it.  There are a bunch of wires in that A
column that you don't want to catch with your drill.  And even worse, the
screws that hold everything in place are longer than they need to be and
they can catch the wires also.  That is what happened when mine was mounted
but fortunately I had a top notch Vanagon mechanic doing the work and he
was able to snake in a new wire.
The several times I have been in and out of my Westy since the handle
really helps my old body, getting in was starting to be a problem.  Problem
solved.