Date:         Thu, 27 May 2021 18:06:43 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Clutch lever arms
Content-Type: text/plain; charset=us-ascii

Dennis rightfully suggested new topic heading.

To recap. My clutch lever arm broke. They are nla.

There are two variations , diesel and wbx gas.

They differ in the spline location , only clocked a couple of splines off from each other.

I ignorantly installed a diesel arm on my wbx some years ago, it was this one that broke. I made it work my adding a Delrin spacer on the slave cyl pushrod.

The arm looks to me like a difficult thing to make. The splines on the arm are proud of the bore. 

Alistair 

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.