Well it seems obvious now Neil! :-) Yeah I thought it multipart. Alistair > On Jun 13, 2021, at 2:45 PM, Neil <musomuso@gmail.com> wrote: > > Alistair. > > My take on that is: > > "if guide is plastic, do not grease" > > Image of 2wd sleeve parts also shows two pieces and looks the same as > Syncro parts. > > To my eye, in a way, the image of 2wd parts is a bit clearer, But I > think I see what you might mean. The Syncro diagram kind of makes it > look like there's a flange, separate tube, (guide) then flange bolts > secure to. > > Neil. > >> On 6/13/21, Alistair Bell <albell@shaw.ca> wrote: >> >> Sorry, wasn’t as clear as I could be. >> >> No I mean the guide sleeve that the throw out bearing rides on. Triangular >> base, three screws to bellhousing. >> >> I’ve only got the metal part. Bentley says grease metal sleeve with moly, >> Don not grease plastic sleeve. And there looks like two triangular bits on >> pic on page 30.8 > > > -- > Neil n > > VE7TBN > > 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt > > 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8 > > VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.