Date:         Wed, 9 Jun 2021 18:14:40 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Front reservoir repair again
Comments: To: Dan N <dn92610@gmail.com>
In-Reply-To:  <CAFdLW6mTcNbajVKxqdpZeEB=gzcbovN17NcoP8igdi4XXagARQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

Dan,

I repaired the ears in my 82 van with PL premium polyurethane construction adhesive. I was fooling around with water rockets at the time and was using that stuff to glue fins on pop bottles. Was one of the few common adhesives that did work on the plastic bottomless good enough.

It sure did work for the ears of the reservoir 

Alistair 

> On Jun 9, 2021, at 5:42 PM, Dan N <dn92610@gmail.com> wrote:
> 
> hi Eric,
> 
> I couldn't find the topic on Samba... I remember something like using JB
> Weld...
> 
> but you have an option to get a new one  here...
> 
> https://www.gowesty.com/product/wiper-washer/22715/-front-wiper-washer-reservoir
> 
> or here
> 
> https://www.vancafe.com/251955453D-p/251955453d.htm
> 
> or here
> 
> https://www.buslab.com/product-p/251955453d.htm
> 
>> On Wed, Jun 9, 2021 at 1:29 PM Eric Caron <ericcaron96@comcast.net> wrote:
>> 
>> Hi Alistair and others,
>> 
>> Recently, Alistair shared a Samba link for a product to support the front

>> wiper fluid tank.  I didn’t think I needed it but now noticed that one of
>> my three plastic tabs on the tank is gone.
>> 
>> Any chance someone can send that link out again so I can order one?
>> 
>> Eric Caron
>>