Have you checked the connections on the ground star under the left side of the dash? I'd start there...but at the same time highly recommend puling the lights out and cutting the ground wires, adding terminal ends, and grounding direct to the headlight assembly mounting screws. Direct path, less resistance, brighter lights. Also, or course, could be a defective HL switch. On 6/22/2021 10:28 AM, John Rodgers wrote: > Headlights have started cutting off and on. The high beams fail more > often than the low beams but they both do it. By pulling the switch stalk > on the steering column they will stay on as long as I hold it back. Has > anyone with ideas as to what this is all about? Do I need a new headlight > switch. Or other? > > Thanks > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.