NICE :-) On Wed, Jul 21, 2021 at 3:46 PM Rob <vwrobb@gmail.com> wrote: > It was the belt on the drivers side! > The belt got behind the moving parts, the plastic sleeve where it > mounts at the side wall (next to the person) was bent in half. A GOOD > flashlight allowed me to see the problem. I routed the belt back to > where it belonged and was able get it unstuck. > Thanks! > > Rob > vwrobb@gmail.com > > On Wed, Jul 21, 2021 at 3:01 PM Dan N <dn92610@gmail.com> wrote: > > > > Check all the seat belts... mine got stuck like that because the seat > belts were in the way for the bed mechanism to me freely... > > > > On Wed, Jul 21, 2021 at 1:46 PM Rob <vwrobb@gmail.com> wrote: > >> > >> I have a 90 Vanagon tintop with the full across zee bed in the back. I > >> cannot get it to pull out into the bed. It used to.... > >> > >> The seat back is released, the seat goes up and down just fine but I > >> can't pull the bed out. I've lubed all the hinges that I can see but > >> It just does not move... Any advice? > >> > >> Rob > >> vwrobb@gmail.com > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.