> I'm curious if the T3 replacement bushings at each arm affect how "fast" edit: or slowly the arm moves and if that allows the spring to free up and move laterally. On 8/8/21, Neil <musomuso@gmail.com> wrote:
> Maybe worn out OEM bottom pads allowed your springs to move laterally? > >..... I'm curious if the T3 replacement bushings at each arm affect > how "fast" e.g. after taking a slow corner or going over an uneven > surface and if that allows the spring to free up then shift and > "clunk".
-- Neil n VE7TBN 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8 VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.