Date: Wed, 18 Aug 2021 12:30:07 -0400
Reply-To: kenneth wilford <kenwilfy@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: kenneth wilford <kenwilfy@GMAIL.COM>
Subject: Re: 1.9 L Complete Exhaust System CANADA
In-Reply-To: <CAK9Aa+n7-iNjRA5fRA9FrpywkxGkQSHn4Fp2NPkbY-hpQQ_SkQ@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Another issue is stock. We ship to Canada all the time and we have been
doing OK being able to source this stuff and get it out in a timely
manner. We have complete exhaust system kits on our site as well. Some
folks have a lower price but when you go to buy it, it is out of stock. We
haven't had that issue yet this summer although as summer is winding down
we may deal with it at some point. We sell the JP Group/Dansk exhaust that
I have installed for the past 20 something years. It is perfectly fine
system that will last for 10 years of more if you use the van on a regular
basis (once a week or more). We could ship it out by the end of the week
UPS ground and you could have it in Canada in 5 days or less.
Ken
On Wed, Aug 18, 2021 at 12:12 PM Bruce Todd <beeceetee@gmail.com> wrote:
> California Imports in Surrey BC have the 2.1 stainless listed however it is
> currently out of stock. Not sure how it stacks up against the GW model.
> They might be able to tell you where you can source one or a 1.9 system
> closer to home.
>
> Knowing you are not wanting the big postage and duty costs from the US -
> this may be a slightly cheaper option.
>
> If you are hoping to keep your van over the long term stainless is the way
> to go if you can bite the bullet.
>
> Bruce
>
> On Wednesday, August 18, 2021, Mark Pinnell <mark.stuart.pinnell@gmail.com
> >
> wrote:
>
> > Thanks Jeff. I'll let you know if I go the piece by piece route, but
> > leaning towards the complete system. I did read about converting to the
> 2.1
> > system, but thought like it sounded too easy... ... I'll revisit that
> > idea.
> > Mark
> >
> > On Tue., Aug. 17, 2021, 3:42 p.m. Mark Pinnell, <
> > mark.stuart.pinnell@gmail.com> wrote:
> >
> > >
> > > In the 10+ years that I have owned Pearl (85 Westy), I have read pretty
> > > much every post. I have sought help on two occasions over the years,
> and
> > > had immediate and correct responses both times. Once stranded in Fundy,
> > NB
> > > and the second time, managed to limp home the last few miles after a
> 2700
> > > mile trip touring Civil War battlefields.
> > >
> > > This time I'm looking for thoughts on purchasing a complete new exhaust
> > > system. I have had it off a number of times for repairs, and am well
> past
> > > the point where patches and welds both outnumber and outweigh the
> > original
> > > metal.
> > >
> > > As I am located in Canada (Orillia, Ontario), the shipping and exchange
> > > rate to USD makes a US purchase prohibitive.
> > > I don't mind doing my own work, and will even travel a reasonable
> > distance
> > > for pickup.
> > >
> > > Looking for possibilities from the group to add to my online searches.
> > >
> > > Regards (and thank you in advance),
> > > Mark
> > >
> >
>
|