Date: Wed, 25 Aug 2021 08:36:36 -0500
Reply-To: "Jim. Felder" <jim.felder@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "Jim. Felder" <jim.felder@GMAIL.COM>
Subject: Re: Anyone make the bold caps for the arm rests.
In-Reply-To: <003b01d79968$4ebd8250$ec3886f0$@com>
Content-Type: text/plain; charset="UTF-8"
Bell probably sinters them out of powdered beryllium on his lunch hour.
Jim
On Tue, Aug 24, 2021 at 11:27 PM KI4TLF <ki4tlf@gmail.com> wrote:
> I saw a "armrest bolt cover VW T4" on Makerbot Thingverse.
> https://www.thingiverse.com/thing:3875275
> It could be printed on a 3D printer and if someone was knowledgeable,
> could modify as needed. It didn't say what year it was for. Then the
> issue would be finding the right color to print them from.
>
> GregM
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of Richard Koerner
> Sent: Tuesday, August 24, 2021 7:45 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Anyone make the bold caps for the arm rests.
>
> More fun!! Buy a Costco lasagne; cook, enjoy (I'm having one tonight).
> Save the black plastic dish it comes in; wash. Cut out a flat section.
> Use some light sandpaper to give the desired "matte" finish. Trace
> something about the size of a nickle; cut carefully. Apply Super Glue;
> install. Done. If done with reasonable care, I bet no one could hardly
> tell the difference. (and, Super Glue hates water....so if ever need to
> remove, use water as your solvent.) Tons and tons of solutions to this
> missing piece on your arm rest bolts.
>
> On Tuesday, August 24, 2021, 05:24:37 PM PDT, Richard Koerner <
> rjkinpb@sbcglobal.net> wrote:
>
> Ha-ha! For that matter, I could buy the appropriate punch from
> McMaster-Carr. Prepare some thin black PVC plastic (with matte finish)
> with acrylic double-sided adhesive with a release paper. With a hammer, I
> could punch these out almost as fast as I could swing a hammer. Then,
> customer simply peels off release paper, applies, done. And Eric, if you
> want Bling, choose the appropriate material to your heart's content; even
> Super Glue would be fine for this application....it's just a cosmetic
> cover. (P.S. I've actually done something very similar at a "real job"
> for low-volume requirements.)
>
> On Tuesday, August 24, 2021, 05:06:12 PM PDT, Richard Koerner <
> rjkinpb@sbcglobal.net> wrote:
>
> I have an 85 Vanagon. Yep, 25 years ago they kept popping off onto
> floor; I didn't want to lose them. So, I secured them with 5 Minute
> Epoxy....and they are still there. (Yes, epoxy onto where it interfaces
> with bolt, but also epoxy on the flange interfacing Vinyl...my feeling is
> the latter provides the stronger securement.) Seems like these could be
> readily produced in reasonable quantities on a Screw Machine (no injection
> molds needed) or of course 3D printing. Getting them into the hands of
> potential customers is a whole 'nother effort.
> For cheapo....you could always cut a circle out of thin black
> plastic...use some epoxy and tape to secure while curing, and have the same
> effect.
>
> On Tuesday, August 24, 2021, 04:22:20 PM PDT, Alistair Bell <
> albell@shaw.ca> wrote:
>
> Jeeze Eric,
>
> I made some the hard way. Gave a pair to jim a.
>
> Maybe … after holidays…
>
> Ab
>
> > On Aug 24, 2021, at 4:20 PM, Eric Caron <ericcaron96@comcast.net> wrote:
> >
> > Anyone make the plastic caps for the 85 style arm rest bolt? I’m
> always looking for some and lately friends keep asking if I have a source.
> >
> > I think I dropped a hint to Uniwerks but didn’t hear back. They could
> make fun ones with VW or other images on them! Even som fancy metal ones
> would be fun!
> >
> > Some of mine were cracked and kept falling off. I found that if I taped
> them tight with electrical tape and put the extra inside it made a tight
> fix and they stopped falling off. But clearly the plastic is giving out.
> >
> >
> > Someone must print them!
> >
> > And, in the department of fun un needed items. A friend showed me he
> had a fancy plastic bolt cap on the seatbelt bold on the driver and
> passenger seat floor bold. Looked slick and finished. He said vanagons
> came with them. I don’t believe it! But, now I might need to cover mine!
> I want some with bling.
> >
> > Eric
> > Eric
>
>
>
>
|