I would much prefer a solder splice due to the current involved. Another option would be to follow the original ground wire away from the fan to a spot far enough away to cut it off and then attach it to the body metal. Mark Thomas Casal wrote: > Do you think a solder splice would be better than those t connector splices? > > On Sun, Aug 29, 2021 at 5:00 PM Thomas Casal <thomas.casal@gmail.com> wrote: > >> I was thinking that could be my other option. Thanks Mark >> >> On Sun, Aug 29, 2021 at 4:52 PM vw_van_fan_Mark <madvws@cox.net> wrote: >> >>> That fan has a brown ground wire and you could splice into that wire >>> with another #12 or #10 wire and screw the other end to bare metal on >>> the van body. >>> >>> Mark >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.