Date:         Wed, 20 Oct 2021 18:59:15 -0500
Reply-To:     Bob Mccullough <mbob1950@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Mccullough <mbob1950@GMAIL.COM>
Subject:      Re: When was the last time you re-packed your CV joints?
Comments: To: "Jim. Felder" <jim.felder@gmail.com>
In-Reply-To:  <CAFnDXk1QWCk1uhg_Jo6gRqQ3ZOXjbpbU=CUJb1q73XzvbMh_0Q@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

Sorry, I can send the mortar box pictures With the text to anyone who wants to see them. Just give a direct shout. 

Bob

Sent from my iPhone

On Oct 20, 2021, at 14:26, Jim. Felder <jim.felder@gmail.com> wrote:


Thanks! 

Jim

> On Wed, Oct 20, 2021 at 1:56 PM mccullough bob <mbob1950@gmail.com> wrote:

> Hope this helps Steven
> 
> 
> 
> 
> 
> 
> 
> 
> I put the cans towards the rear of the space with the lid to the front
> 
> 
> 
> 
> 
> I have them on both sides of the van the left one will lay over the AC hoses and needs the white spacers.
> 
> 
> 
> I used 4 bolts to secure them. i first got them in place with a jack
> and then drilled down thru the floor depressions  and the can top. Bolts were 
> secured to the can and jacked back in to place and secured.
> Then the excess bolt was cut off. 
> 
> 
> 
> View of floor. I cut some of the foam and filled it in.
> 
> 
> 
> I removed the snap latches and welded some connecting nuts to secure the lid.
> To get the right spacing I welded one nut and then another to it.
> The can is 2 to 3 inches higher that the prop shaft cover on my Syncro.
> 
> 
> 
> 
> I used safety allen bolts to secure it. Nice Safe when you leave it at the trailhead.
> 
> 
> 
> 
> 
> 
>  Bob
> 
> 86 Syncro 
> 91 Westy