> > > The vans are 1990 Carat, 1990 tintop syncro, 1989 GL tintop. >> > Look at Bentley page 07.215, track 132. You can get easy access to the X ("load reduction" circuit at pin 2 of the empty relay socket #7 -- just stick a regular spade terminal into that pin of the socket. If you have trouble finding pin 2, it's the only one in that socket that goes live when you turn the key ON. It will turn off during cranking, and it will not put any additional load on the ignition switch. Put a ten amp fuse in line and label the wire. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.