Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2022, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 20 Jan 2022 07:00:54 -0600
Reply-To:     Dan Lamb <mopargramps@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan Lamb <mopargramps@YAHOO.COM>
Subject:      Re: Rear driver's wheels well rust treatment and updates
Comments: To: Eric Caron <ericcaron96@comcast.net>
In-Reply-To:  <3B99357D-1F8E-4E2B-BA5E-15752CC635B8@comcast.net>
Content-Type: text/plain; charset=utf-8

Hi Eric, I really like fluid film, also known as waxy oil. I treated the seam behind the drivers seat from the inside when I had it open and it worked it’s way to the outside of the body. No paint will do that. It should still be in there protecting the area. I did inside the doors, sprayed it up the A and B pillars and the whole underside. Need to do it again as it has been four years now. HTH

Dan

Sent from my iPhone

> On Jan 19, 2022, at 2:51 PM, Eric Caron <ericcaron96@comcast.net> wrote: > > A related question. > > Would the inner area seam be a good candidate to treat with a POR-15 product? Surface rust and mostly paint but the area needs the best protection I can come up with. > > Eric Caron > 85 GL Auto > > > >> On Jan 19, 2022, at 11:31 AM, Eric Caron <ericcaron96@comcast.net> wrote:

>> >> Hi folks, >> >> I have some seam rust just starting on the rear wheel well seams. I removed the rear cabinets and can access the rear section. >> >> No holes but some surface rust on the inside and paint on the outside flaking and rust starting to show. >> >> So, what are some options for slowing this down? >> >> While in this area I will also add sound deadening material. The old fiber glass was intact and dry. >> >> What are the seam rust treatment options people might do? >> >> Also how would you approach the sound deadening and insolation? >> All ideas for products and steps appreciated. >> >> I have Fat Matt here in a roll and Similar fiber glass insolation. >> >> I have fluid film and som rust conversion primers. >> >> But, I’d love some tips from those that have done this work. >> >> Eric Caron 85 GL Auto


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.