Date:         Thu, 20 Jan 2022 12:49:28 -0500
Reply-To:     John Lauterbach <john@JHL.MGACOXMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Lauterbach <john@JHL.MGACOXMAIL.COM>
Subject:      Re: Soeedo repair
Comments: To: "ddbjorkman@verizon.net" <ddbjorkman@VERIZON.NET>
In-Reply-To:  <532470054.677833.1642699049651@mail.yahoo.com>
Content-Type: text/plain; charset="UTF-8"

Take a look at the hub on left front wheel. Â The wheel end of the speedometer fits
into a bracket there. Â John

On Thu, 2022-01-20 at 17:17 +0000, ddbjorkman@verizon.net wrote:
> Hi Zoltan;
> The cable has already been replaced.  Problem still there.  Needle shakes, not
> bouncing.Â
> Dave B.
>
>
> -----Original Message-----
> From: thewestyman <zolo@FOXINTERNET.NET>
> To: vanagon@GERRY.VANAGON.COM
> Sent: Thu, Jan 20, 2022 9:28 am
> Subject: Re: Soeedo repair
>
> The clicking is the cable is broken.  Change it. Check the book and see how
> it is done.  Takes time.  Not much gray matter.
> Zoltan in Hungary
>
>
> -----Original Message-----
> From: ddbjorkman@verizon.net
> Sent: Wednesday, January 19, 2022 10:32 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Soeedo repair
>
> Hello all;
> My speedometer needle is bouncing around and I have a clicking noise.  I
> lubed it up with a non-petroleum lubricant by dripping it onto the speedo
> cable and reinserting it and driveing a bit a few times.  I thought it
> worked, but the problem soon reared ir's ugly head and came back.I seem to
> remember someone doing speedometer repair.  My eyes are no good for that
> kind of job so I'm looking for someone to do it.Any thoughts on this one.
> Dave B.the Boston oneHoping my posts are going through at last.