Date: Wed, 16 Mar 2022 17:14:26 -0500
Reply-To: "Jim. Felder" <jim.felder@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "Jim. Felder" <jim.felder@GMAIL.COM>
Subject: Re: Brake master cylinder weep
In-Reply-To: <085201d83982$ac3a4020$04aec060$@hiwaay.net>
Content-Type: text/plain; charset="UTF-8"
That’s a good idea. I will try it next time. I’m a little concerned about
the residual brake fluid in the line, though, that could theoretically
never get moved out.
Jim
On Wed, Mar 16, 2022 at 5:10 PM Tom Hargrave <thargrav@hiwaay.net> wrote:
> I use a pressure bleeder but bleeding by hand works just as well. It just
> takes a little longer.
>
> But try bleeding by cracking open the line fittings at the master cylinder
> first. Sometimes you get lucky and purge out all the air there and then you
> don't have to go from wheel to wheel.
>
> Thanks, Tom Hargrave
> www.kegkits.com – Electric Brewery Info
> www.towercooler.com – Beer Tower Cooler
> http://goo.gl/niRzVw - My Amazon Store
> www.brew-control.com – Electric Brewery Marketing and Direct Sales
> http://www.hackpilot.com/roadkill/ - A little twisted humor
>
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of Tom C
> Sent: Wednesday, March 16, 2022 2:43 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Brake master cylinder weep
>
> Thank gentlemen! That’s what I figured. Do you all have a bench bleeder
> you prefer or should I just use my motive power bleeder?
>
> On Wed, Mar 16, 2022 at 3:19 PM Tom Hargrave <thargrav@hiwaay.net> wrote:
>
> > The lip seal at the rear of your master cylinder is failing and you
> > need to replace your master cylinder now verses later.
> >
> > The risk is the leak will get worse, you will lose too much brake
> > fluid and your brakes will fail. But it's a common service part.
> >
> > Thanks, Tom Hargrave
> > www.kegkits.com – Electric Brewery Info www.towercooler.com – Beer
> > Tower Cooler http://goo.gl/niRzVw - My Amazon Store
> > www.brew-control.com – Electric Brewery Marketing and Direct Sales
> > http://www.hackpilot.com/roadkill/ - A little twisted humor
> >
> >
> >
> > -----Original Message-----
> > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
> > Behalf Of Tom C
> > Sent: Wednesday, March 16, 2022 12:25 PM
> > To: vanagon@GERRY.VANAGON.COM
> > Subject: Brake master cylinder weep
> >
> > Hey Guys,
> >
> > I think my brake master cylinder has a slight weep. It’s not visibly
> > leaking anywhere it just looks slightly wet we’re it bolts into the
> > booster and it seems like it’s very slowly and gradually making its
> > way down the booster onto the wires and then a little drip. What do
> > you guys think? Any advice would be greatly appreciated. Thanks tom
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2016.0.7924 / Virus Database: 4793/15886 - Release Date:
> > 08/14/18 Internal Virus Database is out of date.
> >
> >
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7924 / Virus Database: 4793/15886 - Release Date: 08/14/18
> Internal Virus Database is out of date.
>
|