Date:         Tue, 29 Mar 2022 18:43:08 -0500
Reply-To:     "Jim. Felder" <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Jim. Felder" <jim.felder@GMAIL.COM>
Subject:      Re: Manual Tranny, funky Reverse Light Switch
Comments: To: Richard Koerner <rjkinpb@sbcglobal.net>
In-Reply-To:  <1175235524.931337.1648593251322@mail.yahoo.com>
Content-Type: text/plain; charset="UTF-8"

Is it the same switch or a new switch? Apparently there were a lot of
variety among Vanagon switches, and sometimes shops do not get it right. It
pays to check that carefully.

Jim

On Tue, Mar 29, 2022 at 5:34 PM Richard Koerner <rjkinpb@sbcglobal.net>
wrote:

> On my 4 speed '85 Vanagon, I recently had the transmission rebuilt; the
> way we did this was NOT to use my existing transmission; instead, my
> mechanic had a transmission rebuilt from some other guy's Vanagon.  This
> allowed us to do a one-day exchange....old transmission out, fresh
> transmission in, and my old transmission will be used by next customer.  My
> mechanic has done this numerous times; the local re-builder he uses has an
> excellent track record.
>
> The problem is the Reverse Light Switch.  It has a "hair
> trigger"...meaning, you barely touch the plunger and the reverse lights
> activate.  I have tried numerous iterations of washers & thin shims to
> solve the problem; I am assuming my switch is my original one, transferred
> over.  At first, I thought I had it solved with the proper combination of
> shims to move switch away from transmission a tiny bit, but the problem is
> back.  Reverse lights come on in all gears.  If I totally remove the switch
> from tranny but still electrically hooked up, it's fine; but the moment I
> barely touch the plunger of the switch, lights come on.  Seems way too
> sensitive.
>
> I am suspecting a bad switch.  Something funky happening internally.
> Wondering if you guys have any experience with this issue?
>