Date: Tue, 5 Apr 2022 17:52:40 -0700
Reply-To: Pete Sicilia <pete@COFFEEPOT.ORG>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Pete Sicilia <pete@COFFEEPOT.ORG>
Subject: Re: Van insolation
In-Reply-To: <252193060.1580938.1649021137112@mail.yahoo.com>
Content-Type: text/plain; charset="UTF-8"
Hiya,
The pockets are for the rear hatch... there are better pictures here..
https://www.etsy.com/listing/1086759025/vw-vanagon-westfalia-hatch-storage-bags
I haven't installed them in my van yet. I was waiting on the sound
dampening and insulation 😀
Cheers,
Pete
On Sun, Apr 3, 2022 at 2:25 PM ddbjorkman@verizon.net <
ddbjorkman@verizon.net> wrote:
> Hi Pete. I like the pockets on the rear pf the bench seat. I couldn't
> tell from the pictures, but I think you have a Westie. Have you had any
> trouble with items in the seat pockets interfering with items stored under
> the bench seat? With the amount of stuff I carry there, I wonder if the
> bed would go down properly. I also say you found them on eBay. How
> available are they?
>
> Dave B.
> the Boston one
>
>
> -----Original Message-----
> From: Pete Sicilia <pete@COFFEEPOT.ORG>
> To: vanagon@GERRY.VANAGON.COM
> Sent: Fri, Apr 1, 2022 11:53 am
> Subject: Re: [VANAGON] Van insolation
>
> This thread is extremely timely for me. I got new storage pouches that
> install in the rear hatch and sliding door and I'm taking the opportunity
> to reduce noise and add thinner insulation for more storage space that
> doesnt make us freeze while camping.
>
> I had purchased denim insulation, but this thread is making me rethink that
> decision.
>
> Here are the storage pouches ...
>
> https://www.etsy.com/listing/1153635528/vw-vanagon-westfalia-sliding-door-and
>
> I purchased this sound dampening material ... does anyone have any
> experience with this product?
> KILMAT 50 mil 50 sqft Car Sound... https://www.amazon.com/dp/B0751G6TMV
>
> Thanks for all of the good ideas!
>
> Pete
>
> 85 Weekender "Llama Truck"
>
>
>
> On Wed, Mar 30, 2022, 6:10 AM Eric Caron <ericcaron96@comcast.net> wrote:
>
> > I’m hoping to find a sound and temp insolation product to replace
> > the fiberglass starting with the slider door.
> >
> > I would want light weight as I’ve already increased the weight with the
> > fat Matt.
> >
> > I need to go in there to tighten the slider handle and to add some fluid
> > film to som areas of concern.
> >
> > I don’t love the fiberglass but have not found anything folks feel is a
> > improvement.
> >
> > Eric Caron
> > 85 GL auto
> >
>
|