Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2022, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 23 May 2022 08:33:24 -0400
Reply-To:     Eric Caron <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ericcaron96@COMCAST.NET>
Subject:      Re: Westy Tap
Comments: To: David McNeely <davmcneely40@GMAIL.COM>
In-Reply-To:  <CACvdLxP=VkyJVoLSC2sH113j_mzbyNXbvGLXckTYJ4v3qOkhbA@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

I love that there is almost always more then one right way to do things.

Eric Caron

> On May 22, 2022, at 11:24 PM, David McNeely <davmcneely40@GMAIL.COM> wrote: > > Why not use wire nuts rather than solder? > > On Sun, May 22, 2022 at 3:27 PM Jim. Felder <jim.felder@gmail.com> wrote: > >> Erik, like much of the Westy aftermarket stuff, only time will tell if the >> pumps hold up. But I got mine from Bus Depot after having the same symptoms >> as McNeely. I finally got tired of fooling with it when camping and >> installed the BD product, the new replacements all look about the same to >> me. I immediately noticed about twice the volume and pressure as the old >> one, and so far it's been OK for a year. While it may or may not last a >> long time, I think it may just be what's available. I intend to get a >> spare, though. Beware that it comes with no connectors, so a little >> soldering is in order. >> >> Jim >> >> On Sun, May 22, 2022 at 4:50 PM ddbjorkman@verizon.net < >> ddbjorkman@verizon.net> wrote: >> >>> It could be a destroyed impeller?!? >>> >>> Dave B. >>> the Boston one >>> >>> >>> -----Original Message----- >>> From: Jim. Felder <jim.felder@GMAIL.COM> >>> To: vanagon@GERRY.VANAGON.COM >>> Sent: Sun, May 22, 2022 12:01 pm >>> Subject: Re: [VANAGON] Westy Tap >>> >>> I have never had to prime mine. Some pumps are different than others, so >>> give it a try. Or, order one of the dandy replacements from our vendors. >>> >>> Jim >>> >>> On Sat, May 21, 2022 at 9:58 PM Bruce Todd <beeceetee@gmail.com> wrote: >>> >>>> No - it is not broken, you have just lost prime. Suck on the end of >> the >>>> tap with your mouth to prime the pump. >>>> >>>> Bruce >>>> >>>> On Sat, May 21, 2022 at 7:50 PM Gil Ngai <eyebawlgil@gmail.com> wrote: >>>> >>>>> Hey all, >>>>> My sink tap makes a motor noise like it’s trying to get water from >> the >>>>> tank but no water comes. The tank is half full. Is that the pump >> that’s >>>>> broken? >>>>> >>>>> Gil Ngai >>>>> 85 Westy 2.5EJ >>>> >>> >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.