On 25 Jun , 2022, at 12:28 PM, Dan N <dn92610@GMAIL.COM> wrote: > > This pic - https://pbase.com/spacecommander/image/172714047 <https://pbase.com/spacecommander/image/172714047> > the power steering sensor missed a wire. That sensor is for raising the > idle when the power steering is locked tight left or right. Depending upon which of the 2 wires that should be connected to this sensor this 1 is, it may or may not be a Big Issue > Need to check this wire with ignition to run position to see if it provides 12vdc,, If it does then that is a Good Thing,, If it Doesn’t then the 12vdc wire may be dangling somewhere just waiting for an opportune time to Short To Ground & Fry Your Wiring Harness ~ This 12vdc wire was Quite Stupidly IMHO Not Fused so can be the cause of a great deal of Grief ~ It is of course possible that the other end of that wire is one of those that has been cut so it may not show 12vdc or Continuity to anything ~ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.