Date:         Tue, 28 Jun 2022 11:05:23 -0400
Reply-To:     Stephen Grisanti <bike2vcu@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stephen Grisanti <bike2vcu@YAHOO.COM>
Subject:      Re: Fuel tank
Comments: To: "kenneth wilford (Van-Again)" <kenwilfy@comcast.net>
In-Reply-To:  <CANEuo0gy0Wno79yXHO4goUWP3TAeyqPckrgk5qqXMBzpVqy4FQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

The alloy fittings I got were T-shaped instead of Y-shaped like the original plastic ones and I thought these made for more difficult routing; harder to get the crossover hose aimed above obstacles. 

Stephen

Mobile

> On Jun 28, 2022, at 10:24 AM, kenneth wilford (Van-Again) <kenwilfy@comcast.net> wrote:
> 
> I would say 4 hours for a first time person.  I did it a lot and got it
> down to an hour or an hour and a half but that is after doing it a bunch of
> times.
> 
> Ken
> 
>> On Tue, Jun 28, 2022 at 10:15 AM Chris S <szpejankowski@gmail.com> wrote:

>> 
>> It takes me about an hour.  It’s a fairly easy job. I would recommend
>> alloy instead of plastic connectors, though.
>> 
>> Chris.
>> 
>> Wysłane z iPhone'a
>> 
>>> Wiadomość napisana przez John Rodgers <jrodgers113@gmail.com> w dniu
>> 6/28/22, o godz. 04:57:
>>> 
>>> Got to drop the tank, install new hardware, crossover pipe and new
>> seals.
>>> Any estimates on cost of the job or time it takes?
>> 
> 
> 
> -- 
> Thanks,
> Ken Wilford
> John 3:16
> www.vanagain.com