Wow! I do appreciate getting a bit of help from my friends. At the West River Westies event we had the 84. I recently noticed the bolt was missing on the right side of the pop top bar that goes left to right. I put it in with difficulty and the top was a bit challenging to close. At the event I asked a Vw experienced friend to look at the bar and see if there was something I was missing. I was…. The bar was bent in a partial curve. Two men got in the van and together bent it back. It was much improved and suddenly the pop top was working smoothly. I put a Buese Shelf on the bar and it was a good fit. Tom told me it would only fit if the bar was very straight and he felt it would help keep it straight. It will as I always lower and raise from the side bars. So, that bar can bend! And I am a believer in using the sides to open and close. And, I get by with a little help from my friends! Eric Caron 84 Westy with a much straighter pop top bar. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.