Date: Wed, 20 Jul 2022 12:31:13 -0400
Reply-To: Eric Caron <ericcaron96@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Eric Caron <ericcaron96@COMCAST.NET>
Subject: Re: Cascade audio double check
In-Reply-To: <CAFdLW6=zyt6OW31eiFqZe43vrtpknrBSO7727ZV0Jk-Qt-m6eQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8
Good tip, I usually do on a warm and dry day. I actually like a little less stick at first as I have to do placement by touch.
Eric
> On Jul 20, 2022, at 10:49 AM, Dan N <dn92610@GMAIL.COM> wrote:
>
> here's a tip...
>
> if the metal/surface is cold to the touch you may want to want it up using
> a heat gun (lwo setting). It will improve adherence.
>
> On Wed, Jul 20, 2022 at 6:09 AM Eric Caron <ericcaron96@comcast.net> wrote:
>
>> There is many right ways to go. And even some product mixing can help
>> with costs.
>>
>> But, I’m actually looking for help to understand decoupled mass loaded
>> Vinyl. The material to keep sound from entering the van at all. The
>> deadening products are helping with vibration and tone but this other stuff
>> should keep road, wind, and engine noise out of the interior.
>>
>> I hope to learn as I go.
>>
>> I am more comfortable with other sound deadening products as they are
>> easier for me to cut and apply, less messy for me, and I suspect lighter.
>> Also, in a pinch, And I do make mistakes more then others, I can get it off
>> with only a little struggle and the metal is clean and like before. I
>> always like being able to go back. Still, all I have applied is still
>> sticking solidly many years later.
>>
>> Luckily, I got a discount on Prime day for the material I like the most.
>>
>> Keep the tips coming!
>>
>> Eric Caron
>>
>>
>>> On Jul 20, 2022, at 12:58 AM, OlRivrRat <OlRivrRat@COMCAST.NET> wrote:
>>>
>>> Hey EC
>>>
>>> Here is My 1/2Cent ~ For sound deadening get the relatively cheap
>> selfstick stuff
>>>
>>> from Lowes or maybe Amazon
>>>
>>>
>> https://www.lowes.com/pd/Peel-Seal-Instant-Waterproof-Repairs-6-in-x-25-ft-Aluminum-Roll-Flashing/1018733
>>>
>>> & then if You want the ultimate sound & Thermal Insulation check
>> out HaveLock Wool,
>>>
>>> https://havelockwool.com/
>>>
>>>
>>>
>>>
>>>> On 19 Jul , 2022, at 12:03 PM, Eric Caron <ericcaron96@COMCAST.NET>
>> wrote:
>>>>
>>>> Hi folks,
>>>>
>>>> Below is a reply from the tech department at Cascade Audio.
>>>>
>>>> Is this the correct Cascade Audio?
>>>>
>>>> It took a couple months to get a reply and then several days to get
>> this reply.
>>>>
>>>> The man is very pleasant and laid back but I’m not sure I am feeling
>> totally confident in his future advice for sound proofing materials.
>>>>
>>>> Is it the same place others have mentioned on the list?
>>>>
>>>> Message with info follows:
>>>>
>>>> Hi Eric,
>>>>
>>>> Good Morning Sir.
>>>>
>>>> Will call at some point Bud.
>>>>
>>>> Went fishing yesterday in the Gulf.
>>>>
>>>> Thank You
>>>>
>>>>
>>>> Earl A. Lirette, III
>>>>
>>>>
>>>> Cascade Audio Engineering
>>>> 6240 West Park Avenue
>>>> Houma, Louisiana 70364
>>>>
>>>> 985-870-0000
>>
|