Jeff, I assume you are going to media blast before paint? If so, I will caution you to COVER everything! I had blast media make it into the bell housing, then to my rear main seal... Also, I did what you are planning, replaced nearly all the bad metal I could get panels for. We pulled ALL the window glass as well, and despite that effort, 10 years later I did have a few spots of rust come through around the window above the sink-cabinet (outside of course) Lastly, make sure the painter uses a good epoxy enamel primer, to seal the metal, before base coat and top coat. For the base coat we used PPG Deltron 2000/DBC. Hope this helps! Jack
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jeff Palmer Sent: Saturday, July 30, 2022 6:25 PM To: vanagon@GERRY.VANAGON.COM Subject: Getting ready to paint Hi everyone. Sometime soon I will hopefully be painting my 85 Westfalia. Does anyone have a list of parts I would need - trim, gaskets, etc. Also wondering if I should order every sheet metal panel I can find … things get rusty up here. Thanks Jeff Sent from my iPhone= |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.