Date:         Tue, 20 Sep 2022 10:47:54 -0400
Reply-To:     Jack R <jack007@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jack R <jack007@COMCAST.NET>
Subject:      Re: Pre pump filter
Comments: To: Eric Caron <ericcaron96@COMCAST.NET>
In-Reply-To:  <CC2002EA-9517-4CD9-A8A9-48758031E812@comcast.net>
Content-Type: text/plain; charset="us-ascii"

This is how I modified my 84 Fuel Pump / Filter.
https://photos.app.goo.gl/upBC33dWXtffiZCQA

Jack

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Eric Caron
Sent: Tuesday, September 20, 2022 10:15 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Pre pump filter

Hi folks,

One change I did make, during the tank change out, I was having trouble
locating the correct size fuel line for the tank to pump and during the
search a  local vanagon repair shop I recently discovered said he would
recommend putting in a pre filter in addition to the post filter.  He would
not recommend the plastic cube but instead recommended  a WIX 33248.  I put
this in line before the pump.  I felt as the tank is new and as I could get
crud in by accident, the pre filter could only do good.
This filter goes right in the 11 mm line from tank to pump.

As I noted, in an earlier post,  the pump is quiet so no restriction created
by the additional filter.

Also, when I ordered my injectors from Mansispeed, I noticed he also
recommends a pre pump filter for the 86 and later and makes a kit.  This
inline filter seems a easy way to do the same thing.

        Eric Caron