Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2022, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 22 Sep 2022 15:01:51 -0700
Reply-To:     Bruce Todd <beeceetee@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bruce Todd <beeceetee@GMAIL.COM>
Subject:      Re: cooling system hose clamps
Comments: To: mark@markmcculley.com
In-Reply-To:  <6F46654C-83CC-4D35-B988-8A47D36957A7@markmcculley.com>
Content-Type: text/plain; charset="UTF-8"

Hi Mark - Any evidence of chalky residual (dry) coolant in or around the engine bay?

Bruce

On Thu, Sep 22, 2022 at 7:59 AM Mark McCulley <mark@markmcculley.com> wrote:

> About a year ago I had my cooling system revamped with a new radiator, > water pump, stainless steel pipes to the radiator, and many new hoses. > Since then I can smell coolant outside the van after driving it. I took it > back to the mechanic, said they pressurized the system and found no leaks. > There is no evidence to be found of any coolant dripping on the pavement > beneath the van, only the smell. On a recent 200 mile trip the van depleted > most of the coolant in the overflow tank. The rear heater core is bone dry, > that isn't the problem. > > The coolant smell is strong on the right rear side so I've been looking at > the hoses and connections in that area. I suspect the leak may be at the > hose connection on the front of the right head. This connection is above > the exhaust outlet so any coolant that leaked would be vaporized and never > reach the ground. This connection is a new silicone hose with a new > screw-type hose clamp. > > My question here is whether an ear clamp (Oetiker style) would be better > than a screw-type clamp for this application. > > Also part of the revamp was a new aluminum coolant reservoir with a 16lb > pressure cap. I've also wondered if the cap might be defective, causing the > system to run at a higher than designed pressure. > > I spent a lot of $$ so that the all important cooling system would be > robust and I wouldn't have to worry about it, very dismayed to have to keep > troubleshooting this. I appreciate any observations or comments. > > Regards, > Mark > '87 syncro >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.