Date:         Sat, 3 Dec 2022 12:58:05 -0800
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: Accelerator Pedal
Comments: To: Jamie Auch <jamie@kookymathteacher.com>
In-Reply-To:  <CEC6559E-8263-492E-B431-E5CE514B248C@kookymathteacher.com>
Content-Type: text/plain; charset="UTF-8"

I had the very same problem on my van (gas pedal went flat with no
connection)... a L shaped rod attached to the pedal and hooked to the
mechanism thru the hole, My problem was the rod was unhook down there but
still attached to the pedal. From the inside I removed the rod, reattached
the mechanism and reattached the rod to the pedal. Later on I replaced the
whole mechanism down there.
Your problem may be different but here is a reference.
https://www.thesamba.com/vw/forum/viewtopic.php?t=138530

On Sat, Dec 3, 2022 at 12:42 PM Jamie Auch <jamie@kookymathteacher.com>
wrote:

> Dear Folks,
> I have a quick question that should
> not take time away from the list. I was driving along and I lost tension
> on accelerator pedal on my ‘89. Luckily it was not the cable but the pedal
> itself separated from the floor. How is the pedal attached? I saw two
> holes, but could not find the screws. Please advise. Thanks so much
> -Jamie Auch
> The Kooky Math Teacher
> Sent from my iPhone