Date: Thu, 2 Feb 2023 14:26:00 -0700
Reply-To: OlRivrRat <OlRivrRat@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Subject: Re: Vanagon Subaru engine rough at speed
In-Reply-To: <5081C73D-4C2B-4841-AA21-EB4052FF8B46@comcast.net>
Content-Type: text/plain; charset=utf-8
Eric & JR & TWeEIMC
https://groups.io/g/SubaruVanagon/topics
subaruvanagon@yahoogroups.com
Will need to join & be accepted but it’s just a formality ~
> On 2 Feb , 2023, at 10:37 AM, Eric Caron <ericcaron96@COMCAST.NET> wrote:
>
> Hi John,
>
> I was wondering if someone on the list has the subscription info for John for the Vanagon Subaru list? I enjoy this conversation but wonder if the list with more Subaru vanagon owners might be helpful. I’m pretty sure there is one.
>
> I sort of wish we were all on the same list as issues relate no matter what power plant you use. And the Subaru talk has been really interesting.
>
> Those I know with Subaru motors are enjoying them mostly, but they also have ongoing technical and support needs.
>
> Eric Caron
>
>
>
>> On Feb 2, 2023, at 12:33 PM, John Rodgers <jrodgers113@GMAIL.COM> wrote:
>>
>> Thanks for the info.
>>
>> On Thu, Feb 2, 2023 at 11:24 AM OlRivrRat <OlRivrRat@comcast.net> wrote:
>>
>>> The size of Your Wheels is Irrelevant, It’s the Tire Size that am
>>> asking
>>>
>>> about as that is what defines the OutSide Diameter of the Wheel/Tire Combo
>>> ~
>>>
>>> As for Your Van not wanting to go over 4K,,,, That Is Your ECU Not
>>> Getting
>>>
>>> the info from Your VSS that You are actually moving @ some speed down the
>>> Rd.
>>>
>>> So either Your VSS Is Not Working Correctly or The Signal It May Be
>>> Producing Is
>>>
>>> Not Getting To The ECU,,, If VSS Is OK Then The Circuit To The ECU May Be
>>> Bad
>>>
>>> Or The ECU May Have A Problem ~ I'm not familiar with Your type of XSS as
>>> Mine
>>>
>>> is the In Speedo type but 4mm of Clearance seems like A Lot for a Hall
>>> Sensor to
>>>
>>> actually be able to produce a signal ~
>>>
>>>
>>>
>>>> On 1 Feb , 2023, at 9:21 PM, John Rodgers <jrodgers113@GMAIL.COM> wrote:
>>>>
>>>> Got it. Ring gear in the stock auto tranny is something 4 point something
>>>> or other. The wheels are good old 14 inches. These are new so going to 16
>>>> inches is not in the plans anytime soon.
>>>>
>>>> On Wed, Feb 1, 2023 at 10:15 PM OlRivrRat <OlRivrRat@comcast.net> wrote:
>>>>
>>>>> On 1 Feb , 2023, at 12:16 PM, John Rodgers <jrodgers113@GMAIL.COM>
>>> wrote:
>>>>>
>>>>>
>>>>> What rpm should show on the tach at 70 mph? Mine shows 4000.
>>>>>
>>>>>
>>>>> That depends on Transmission Gearing & Tire Size ~
>>>>>
>>>>>
>>>
>>>
|