Date:         Sun, 19 Feb 2023 16:37:33 -0500
Reply-To:     Eric Caron <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ericcaron96@COMCAST.NET>
Subject:      Re: Fuel Sender gasket
Comments: To: rob wilke <rob@ROBWILKE.COM>
In-Reply-To:  <CANgJ7W1s_Nu1=bXiS8WMZUaYp7487Qek9HuCW3jLw2Nt02gNoA@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

Hi Rob,

Your message came through.

I’ve only changed the fuel sensor once and the gasket was a big O Ring.  

Hopefully someone with more experience can speak to any concerns. 

Eric Caron 



> On Feb 19, 2023, at 3:11 PM, rob wilke <rob@ROBWILKE.COM> wrote:
> 
> hope that this is how you post to this list...
> 
> I have successfully removed the fuel sender etc. and noticed two small
> indentations opposite each other on the inside surface of the opening. The
> gasket is correspondingly thick ( thicker than the replacement gaskets
> are)in the two places of the indentations which seems logical. This is not
> where the two halves meet.
> Should i just put it back together and hope all is good?
> 
> oh and BTW i don't recommend doing this indoors in the winter..
> 
> Thanks
> Rob