Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2023, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 23 Feb 2023 10:38:21 -0500
Reply-To:     Eric Caron <ericcaron96@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ericcaron96@COMCAST.NET>
Subject:      Re: Coolant change questions
Comments: To: "mark@markmcculley.com" <mark@MARKMCCULLEY.COM>
In-Reply-To:  <E322AEF6-EBEC-4FD0-BC5A-CCF97D08E23B@markmcculley.com>
Content-Type: text/plain; charset=utf-8

Hi Mark,

I changed the two hoses to radiator and used the GW spring clamps. They didn’t work. Too loose on the rubber hoses. I used the screw clamps they included with the kit. The spring clamps were a option on the site.

I’ll be doing again when the radiator arrives.

Eric Caron

> On Feb 15, 2023, at 10:08 AM, Mark McCulley <mark@MARKMCCULLEY.COM> wrote: > > I replaced the hoses in my '87 2.1 last fall and am still having an issue with a leak at the connection to the radiator. It's a silicone hose and I don't have a spring clip that fits so I used a screw clamp. I already stripped one clamp trying to get it tighter. I'm thinking I will need to disconnect the hose, clean and dry the connection and use an adhesive/sealant. This will have to wait for warmer weather. Final Charge coolant may be a contributing factor, I recall that Dennis said this coolant may be more prone to leaks like this. > > Regards, > Mark > >> On Feb 14, 2023, at 2:51 PM, Eric Caron <ericcaron96@COMCAST.NET> wrote: >> >> Help needed. >> >> I need to change the two coolant hoses from radiator to metal pipes. >> >> I have new hoses and spring clamps. >> >> I expect just about all the coolant to come out. >> >> So, >> >> How much coolant is in their and how much do I need to purchase to have on hand to refill? >> >> Any tips on draining? >> >> Any tips on filling and bleeding? >> >> This is a 1.9 system. >> >> I might as well drain and start over with clean coolant. >> >> I plan to use the final Charge that Dennis has recommended in the past. >> >> All tips and directions are greatly appreciated. >> >> Eric Caron >> 84 Westfalia


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.