The side of rad baffles.. There are drawings out there for you to make new . And I think gw makes replacements
The sensor, Dennis will have answer, but I like to put on some gasket sealing compound on those tyoe of things
Can’t recall the details, but permatex gasket maker anaerobic red stuff. It’s 518 I think? In the threads and the gasket, just a little bit . Ab > On Mar 14, 2023, at 9:03 AM, Eric Caron <ericcaron96@comcast.net> wrote: > > Hi foks, > > Is there a procedure or torque specification for installing the new sensor onto the new radiator? > > I have the sensor and it came with a gasket. > > New radiator arrives tomorrow, fingers crossed this one is solid and without impact marks from shipping. > All is out and area ready for the new radiator to go back in. > > Any suggestions for anything that should be done in there before it goes back in? > > Considering the years of dirt on the back of the van I was amazed how clean the front was. > > There is insolation on one side of the fan area but not on the other. Is that missing or how it was done? > > I will add just a bit of sound deadening in places I can now reach. > So sensor install tips? > > > Eric Caron |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.