Date: Sun, 12 Mar 2023 13:26:36 -0500
Reply-To: John Rodgers <jrodgers113@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: John Rodgers <jrodgers113@GMAIL.COM>
Subject: Re: no fuse for fuel pump? Adding fuses.
In-Reply-To: <BL0PR05MB4916A69E24808A73C231089FA0B89@BL0PR05MB4916.namprd05.prod.outlook.com>
Content-Type: text/plain; charset="UTF-8"
An aside to this. A while back when I got a free '91 carat from Uncle Joel
Walker(remember him?) he showed me an aircraft style buss bar with rocker
type resettable circuit breakers that he had installed in the space behind
the glove compartment. It was powered by a cable he had run from the
battery forward. He had added a good bit of electrical stuff to the van and
this took a load off other circuits. Behind the glove box is a good place
for electrical expansion.
On Sun, Mar 12, 2023 at 10:01 AM Dennis Haynes <d23haynes57@hotmail.com>
wrote:
> There are a number of thoughts to adding fuses or circuit breakers. For
> most VWs not having the ignition and fuel systems fused is normal, going
> Back to even the very first Beetles. Likely the plan is don't have a
> nuisance shutdown or if a failure occurs whatever it takes to keep it
> running even at a loss. This from a design point that almost every light
> bulb filament has its own. Yet most all of the wiring is not protected. In
> the building and industrial world we fuse coordination strategies. You will
> see this in Aisian vehicles and to some extent American cars. Self
> resetting circuit breakers used on the headlight to keep them blinking,
> trying when something goes wrong. Most GM card used fusible links at the
> battery-alternator connection to the main harness. Large fuses now more
> common. GoWesty EFI adds fuses for the pump, ignition, and ECU.
>
> For the power steering switch the connectors originally had covers. Most
> are broken and missing. Replace the quick slide connector with one that is
> robust, fully insulated, including a shrink tube for the wire, and of a
> quality that it will not loosen and fall off.
>
> Dennis
>
>
>
>
>
>
> -----Original Message-----
> From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of Dan N
> Sent: Saturday, March 11, 2023 4:44 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: no fuse for fuel pump?
>
> I have that problem... The wires on the power steering sensor are too
> close to the intake elbow, one wire fell off and hit the elbow and created
> spark and smoke while I am driving... People honk their horns to warn me. I
> am lucky that there was no fire...
>
> On Sat, Mar 11, 2023 at 11:11 AM OlRivrRat <OlRivrRat@comcast.net> wrote:
>
> > IMHO the +12v wire to the power steering pump idle boost
> > switch is
> >
> > the Most Necessary Wire In Need Of Fuse!!! If it happens to Fall Off
> > due to
> >
> > vibration or get Blown Off by water pressure during an Eng Cleaning &
> > then
> >
> > makes contact with Ground, the result will be a Fried Eng area Wire
> > Harness
> >
> > & those Are Not Easy to Find or Replace ~
> >
> >
> > > On 11 Mar , 2023, at 10:30 AM, Dan N <dn92610@GMAIL.COM> wrote:
> > >
> > > thanks Dennis,
> > >
> > > Is it good to add a fuse for the ignition and the fuel pump if I
> > > know
> > where
> > > to put them? (I don't know where yet)
> > >
> > > On Sat, Mar 11, 2023 at 9:10 AM Dennis Haynes
> > > <d23haynes57@hotmail.com>
> > > wrote:
> > >
> > >> There are a number of circuits that do not have any overcurrent or
> > >> short circuit protection. The fuel pump and ignition is amongst
> > >> them. The fuel pump power wire also provides the positive 12 volt
> > >> for the injectors,
> > the
> > >> power steering pump idle boost switch along with the idle speed
> > controller,
> > >> and for the 1.9L the heater for the auxiliary (warm up) air regulator.
> > Note
> > >> that the ECU and ignition get powered from the ignition switch. The
> > >> ECU
> > and
> > >> fuel pump relay get powered from a connection in the black box on
> > >> the firewall connected directly to the alternator. Yes a short can
> > >> make for
> > a
> > >> real mess.
> > >>
> > >> Dennis
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of
> > Dan N
> > >> Sent: Saturday, March 11, 2023 12:03 PM
> > >> To: vanagon@GERRY.VANAGON.COM
> > >> Subject: no fuse for fuel pump?
> > >>
> > >> hi all,
> > >>
> > >> Me and Bruce discovered there's no fuse for the fuel pump on the
> > 1981-1991
> > >> van fuse panel diagram. Anyone know why? Maybe there's one but
> > >> located somewhere else?
> > >>
> > >> thank you,
> > >>
> >
> >
>
|