Hi all, The sliding door on my van closes well, slides well. The rollers were replaced about a year ago. But... the left edge of the door (looking from outside) is not flushed with the body panel. I tried to adjust the L bracket that holds the bottom roller. I loosen the bolts and moved the door a bit in and out... No good result, no change... So.. is there anything else I should do? thank you... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.