Thank you for the tip about the screw. Replaced that after I used 3M red double- stick to hold the upper portion of the panel to the door. John
-----Original Message----- From: Raimund Feussner <ray@V6BUS.DE> Reply-To: Raimund Feussner <ray@V6BUS.DE> To: vanagon@GERRY.VANAGON.COM Subject: Re: Would like help with sliding door inner panel Date: 06/16/2023 08:33:47 AM Probably the little screw under the rear latch is missing. This holds the panel curved onto the door. Am 16.06.2023 um 14:28 schrieb John Lauterbach: > Recently had my '91 Vanagon detailed inside and outside. Detailer put back inner > panel on sliding door. Rear edge of panel is catching on body when I open door. > What is best way on tying down rear end of panel? > > Thank you, > > John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.