Date: Fri, 30 Jun 2023 22:00:01 -0500
Reply-To: Jeff Palmer <w.jeff.palmer@ICLOUD.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jeff Palmer <w.jeff.palmer@ICLOUD.COM>
Subject: Re: Thoughts on antenna replacement
In-Reply-To: <CAG0-GTzhsACk1vbnAx-AsTHEK_BcfDKcBtd+WGRX1Yp95UBaxQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8
Is this the same for all years do you think? Would be interested in knowing where you got the antenna (P mail is fine!)
Thanks
Jeff
Sent from my iPhone
> On Jun 30, 2023, at 9:30 PM, Roger Whittaker <rogerwhitt1@gmail.com> wrote:
>
> Awesome tip for those seeking advice
>
>> On Fri, Jun 30, 2023 at 5:43 PM Jim Felder <jim.felder@gmail.com> wrote:
>>
>> I recently ordered a fully retractable antenna for my 1983 westy. The
>> others I have had over the years did not retract fully. They tore my car
>> cover and got bent doing this and that, and I decided to go retractable.
>>
>> For those who have never fooled with such, think of the difference as this:
>> if you consider the mount through the front of the car, the sheet metalwith
>> the hole that the antennainstalls through as "ground level," the standard
>> antenna lives 100% above ground. Beneath the sheet metal, under the dash,
>> there is nothing but the cable to the radio. Everything telescopes into the
>> six or eight inches of aerial protruding above the mounting point.
>>
>> The fully retractable antenna, on the other hand, lives "below ground
>> level." That is, everything telescopes into a tube that hangs down from the
>> mounting point, all stored within the underdash area of the car. Almost
>> nothing sticks out on top.
>>
>> The problem you will encounter making this switch is that there is not
>> enough room to fit the underground part of the aerial between the big front
>> stiffener (that runs behind the grill on the interior of the car) and the
>> sheet metal it protrudes up through. But not to worry! VW, even on my old
>> 1983, put a rectangular rubber grommet in place in a hole in the top of the
>> big front stiffener, exactly below the hole in the front sheet metal. Ths
>> hole allows the antenna to extend down through the rectangular hole, once
>> the plug is removed, and give the "underground" part of the aerial a place
>> to live.
>>
>> Probably everybody but me knew that the rubber grommet and the hole was
>> there to allow the installation of a fully retractable antenna, but in case
>> not, I'm letting you know how it is possible to install one.
>>
>> Jim
>>
>
>
> --
> roger whittaker 604.414.6266
>
> ----------------------------------------------------------
> PR MARINE SURVEYORS &
> http://www.tvthatworks.com
> http://www.tvpowellriver.com
> LinkedIn -
>
> - ca.linkedin.com/pub/roger-whittaker/14/78a/b71/Explore printed work at:
> http://www.prliving.ca/
> View the growing list of video work at:
> http://www.youtube.com/user/LastonLastof#g/u
> http://vimeo.com/42309497
>
> http://www.prpeak.com/articles/2010/11/29/multimedia/video/doc4c62e5f80d228504902172.txt
|