It’s a bit of a kludge , but got new hoses and tees from Amin heater lines to the rear heater installed. The stock lines are 1/2” one end and 5/8 at the heater. I used 1/2” through, saved stock ends and made connectors . At one of the tees, the hose from heater has a 90 degree end . With the replacement plain old 1/2” heater hose it makes for a less than graceful lead in. But I made it work. I think it’s harder to do this on Syncro than 2wd. For sure I don’t recall being so pissed off when I did it on my 82 diesel westy http://shufti.blog/2023/07/30/vanagon-rear-heater-hoses-and-tees/ Ab |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.