Date: Sun, 17 Sep 2023 12:55:38 -0400
Reply-To: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject: Re: Early 84 sliding door mechanism - need a part!
In-Reply-To: <CAHFNU65pLfGhTg+MmpW4rHAUmojsKesQc1MEDYosByWc2HV0WA@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
We have new wiring harness, rebuilt ECU, Air Flow Meter, new distributor,
coil, ignition module all for the Digijet system. Also our injectors that
are the same or better than Mansi also comes with aluminum fuel rails.
Check us out at www.vanagain.com
Ken
On Sun, Sep 17, 2023, 12:45 PM Skip L <skiplaubach@gmail.com> wrote:
> HI Eric
>
> First let me say thank you for your frequent contributions to this site (I
> read all posts, but rarely reciprocate)! Your enthusiasm and friendliness
> on the site (and you're not the only one) makes this site great!
>
> Second, I just ordered the Operating Cam from Bus Depot, so I should
> search *all
> *of our vendors first before posting, so the APB is cancelled.
>
> Third, I have some spare parts for the 1.9, as my original rebuild (2011)
> consisted of getting two cores with all externals (plus my own), so let me
> know what you may be looking for and I may have it. BTW, I'm located in a
> far western suburb of Chicago. Re AFM, I bought a rebuilt one from GoWesty
> (not that my original was bad, I'm just more of a "replacist" rather than a
> "rebuilter". I have the old one if you would like it and I had no reason
> to believe that it's bad. Best thing I ever did for the engine was to buy
> a new wiring harness from the good guy in Ohio (name slips me).
>
> For you (or anyone on this list), I'm happy to provide parts for free (I
> can ship from my office with your FedEx or UPS acct. number (or you could
> email me your FedEx/UPS label (create one online))).
>
> Now, it's been awhile since I've trouble-shot a "searching idle", so open
> to some suggestions. For background, my rebuilder is a renowned air-cooled
> guy (he rebuilds engines for the "American Pickers" personal collections).
> He timed the engine up, but couldn't eliminate the "searching idle". He
> closed off the "retard". Not sure if the issue is a vacuum leak or
> otherwise. Any ideas anyone (if you're still reading...).
>
> Kind regards,
>
> Skip
>
> On Sun, Sep 17, 2023 at 11:17 AM Eric Caron <ericcaron96@comcast.net>
> wrote:
>
> > Hi Skip,
> >
> > I don’t have this part or an easy source. Where are you located?
> >
> > Your van engine and ignition is one I actually really like.
> > Despite everything I’m a fan of a 2.2 engine with a 1.9 ignition.
> >
> > I’m currently trying to locate spare 1.9 parts as I like the set
> > up. It is simple enough for me to actually sometimes fix and maintain.
> >
> > I’m hoping that with all the engine conversions out there I’ll be
> > able to find some good used 1.9 ignition parts. AFM is high on my list.
> >
> > Enjoy your new engine and keep reporting back.
> >
> > Hope you find the idle issue soon.
> >
> > Eric Caron
> >
> >
> > > On Sep 17, 2023, at 12:07 PM, Skip L <skiplaubach@GMAIL.COM> wrote:
> > >
> > > Hello Friends,
> > >
> > > A critical part failed/broke on my slider mechanism that I cannot find
> on
> > > our vendors' websites. Would anyone have a spare Early '84 slider
> > mechanism
> > > (I'll buy the whole thing, but just need the Operating Cam).
> > >
> > > Referencing Bentley 58.8, I need an Operating Cam (middle right on
> page).
> > > Mine cracked and separated. While the door works so-so since I did not
> > > lose the cracked Cam pieces, its days are numbered as this piece is
> going
> > > to fall out in the not too distant future.
> > >
> > > By the way, on other notes, I just had an engine rebuild (by not me,
> but
> > a
> > > qualified rebuilder), using a 2.1 case, new heads, 2.2 pistons/jugs
> > (new),
> > > while maintaining the 1.9 wiring/externals, and installing the RMW SS
> > > exhaust. Just breaking in. The idle searches so looking for a vacuum
> > > leak. Also just ordered Mansispeed fuel injectors (waiting on mail),
> so
> > > interested to see any improvements.
> > >
> > > Please contact me directly if you have a spare slider unit or just the
> > > Operating Cam. Thanks!
> > >
> > > Kind regards,
> > >
> > > Skip
> >
> >
>
| 
