Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2023, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 3 Oct 2023 10:22:24 +0000
Reply-To:     "ddbjorkman@verizon.net" <ddbjorkman@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "ddbjorkman@verizon.net" <ddbjorkman@VERIZON.NET>
Subject:      Re: grease on axek
Comments: To: OlRivrRat <OlRivrRat@COMCAST.NET>
In-Reply-To:  <E2460FB0-6E2B-4E7C-9C28-F1FB48C1479D@comcast.net>
Content-Type: text/plain; charset=UTF-8

Thanks Dean. This is the problem I have been having with the list for some time.  The moderators keep telling me that I show up in the archives, so it's there, but no one receives them.  It is quite frustrating, especially for something like this.  I am back from the trip; bus ran well and no noise from the CV's.  Came back with a cold, but when I am better, I will send a pic.Thanks again my friend. Dave B.the Boston one Hopefully you will get this.  Sometimes replies work better than original posts. On Monday, October 2, 2023 at 11:30:34 PM EDT, OlRivrRat <olrivrrat@comcast.net> wrote:                 Hey DB

        Just so Ya know >> Did not recieve Your “grease on axek” EM,,,

The most recent EM from You via List was 30Aug ~

        As to the greasy axle issue > Probably not a show stopper,,, Can You

take a Pic & post it somewhere, Or send directly to Me > I think I usually

get Your direct 1s,,, but that being said, if I didn’t 1 I guess I would have

no way of knowing ~

> On 2 Oct , 2023, at 5:53 AM, John Lauterbach <john@JHL.MGACOXMAIL.COM> wrote: > > Dave, since I have found a shop to service my '91 Vanagon, and it runs perfectly, I > have not had the inclination to get underneath it and see what is going on.  If by > inboard axle, you mean the one that goes into the transaxle, would it be a case of > the a oil seal failing? John > > -----Original Message----- > From: ddbjorkman@verizon.net <ddbjorkman@VERIZON.NET> > Reply-To: ddbjorkman@verizon.net <ddbjorkman@VERIZON.NET> > To: vanagon@GERRY.VANAGON.COM > Subject: grease on axek > Date: 10/01/2023 08:42:14 PM > > Hello all. > Little disappointed in the list.  Noone has an answer to my earlier post about grease > on my inboard axel. > I could really use some list wisdom.  Do I need to get to a garage and have them > squirt some grease in there?? > Dave B.the Boston onePlease give me some input.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.