Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (May 2024, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Fri, 24 May 2024 19:42:23 -0700
Reply-To:   Alistair Bell <ragnarhairybreeks@ICLOUD.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Alistair Bell <ragnarhairybreeks@ICLOUD.COM>
Subject:   Re: Front heater never shuts off
Comments:   To: Jim Felder <jim.felder@gmail.com>
In-Reply-To:   <CAFnDXk0xzBxhLc=GokwwuufxG-3WnZvNkvoxDpR-ymHJ=4gC3A@mail.gmail.com>
Content-Type:   text/plain; charset=utf-8

Interesting coincidence….i just got one of tencents ( intrepid overland ) heater valves with the constant bleeding feature . Air bleeding of coolant, not fingers.

Haven’t installed yet.

My stock valve does not stop coolant to core any more.

Alistair

> On May 24, 2024, at 4:24 AM, Jim Felder <jim.felder@gmail.com> wrote: > > On the cheap(er) OEM style replacements, they will lose the ability to shut > off water flow no matter if they are open or closed. I went through about > three of those before ordering the then-$70 Gowesty upgrade valve and > installing it. Even then it failed after two years but they sent me a free

> replacement. That has been about twelve years and no problem with the > valve, just the cable-kink service Dennis describes one time. > > The swap out operation is almost trivial. Don’t try to work with your hands > up in the valve cavity lying on your back. Drop the glovebox and remove the > two heater hose connections from the heater core. Pinch off the hoses with

> harbor freight hose clamps so you don’t lose coolant. Lower the whole valve > assembly to the driveway and work on it there, then draw the hoses back up

> and reconnect to the heater core. > > Jim > >> On Fri, May 24, 2024 at 6:12 AM Dennis Haynes <d23haynes57@hotmail.com> >> wrote: >> >> First place to look is at the cable. Common for it to kink at the lever >> end. Easy to service after pulling instrument cluster. >> Only reason to replace valve is if it is frozen to the point it cannot >> move or it leaks. If it moves, it will close as best it can unless the guts >> were melted. >> >> Dennis >> >> >> -----Original Message----- >> From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of ron >> johnson >> Sent: Thursday, May 23, 2024 10:03 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Front heater never shuts off >> >> My 91 is so uncomfortable in the summer. >> Heat pours out of the dash with the heat control fully off. >> Recommendations mostly point to replacing the control valve which is a >> difficult process. Howes sells a deluxe unit for $90….. >> Can a shut-off valve be installed in an easier to access location. >> >> Many Thanks, >> Ron J >> Portland, OR >> 91 Weekender, ‘Betsy’ >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.